Scientific Publications

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2007

VILLARREAL BASTARDO, NORKY · GOVERNADO MITRE, ISABEL · POVEDA BERNAL, JESUS ​​· HAXAIRE, PASCAL · LÓPEZ AGUAYO, ADOLFO · ENCINA CAÑAL, AVELINO. PROPERTIES AND PROCESSING OF PLASTIC MATERIALS FROM CABLES FOR THEIR RECYCLING AND TRANSFORMATION. In: MODERN PLASTICS MAGAZINE, 2007, n. 93, v. 607, pp 46-55.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2007

VILLARREAL BASTARDO, NORKY · GARCIA LOPEZ, DAVID · PASTOR BARAJAS, JOSE MARIA · ROSALES, C. · PERERA, R. · CONTRERAS, V. · MATOS, M.. MORPHOLOGICAL, RHEOLOGICAL AND MECHANICAL CHARACTERIZATION OF POLYPROPYLENE NANOCOMPOSITES BLENDS. In: JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2007, no. 4, v. 8, pp 1762-1774.

Energy and Mabte Automotive Defense Energy Railway Naval 2007

MELGAR BACHILLER, ANDRES · TINAUT FLUIXA, FRANCISCO VICENTE · DOMINGUEZ CARRERO, JOSE IGNACIO · LAGET, HANNES. MISFIRE AND COMPRESSION FAULT DETECTION THROUGH THE ENERGY MODEL. In: MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2007, no. 3 V. 21, pp 1521-1535.

Circular Economy Sustainable and Safe Smart Mobility Aeronautics Automotive Defense Railway 2005

CAÑIBANO ALVAREZ, ESTEBAN · DEL AMO NIETO, OMAR · GONZALEZ HERNANDEZ, MANUEL IGNACIO. BRAKE DISC DESIGN FROM A MULTIDISCIPLINARY POINT OF VIEW. In: DYNA ENGINEERING AND INDUSTRY, 2005, n. 3, v. 80, pp 27-32.

Energy and Mabte Sustainable and Safe Smart Mobility Aeronautics Automotive Construction Defense Energy Railway Naval 2006

MONTES LEON, LUIS ALBERTO · LAGET, HANNES · DEL BLANCO VILLALBA, SANTIAGO · IGLESIAS HOYOS, DAVID. FAILURE DETECTION IN AN ALTERNATIVE INTERNAL COMBUSTION ENGINE THROUGH SPECTRAL ANALYSIS OF THE INSTANT REGIME. In: MAINTENANCE: INDUSTRIAL AND BUILDING ENGINEERING, 2006, n. 197, v. , pp 17-23.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

MERINO SENOVILLA, JUAN CARLOS · GARCIA LOPEZ, DAVID · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA. POLARIZED CONFOCAL RAMAN MICROSPECTROSCOPY STUDIES OF CHAIN ​​ORIENTATION ON INJECTED POLY(PROPYLENE)/MONTMORILLONITE NANOCOMPOSITES. In: JOURNAL OF APPLIED POLYMER SCIENCE, 2005, no. 6, v. 96, pp 2377-2382.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

MERINO SENOVILLA, JUAN CARLOS · GARCIA LOPEZ, DAVID · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA. POLARIZED CONFOCAL MICRORAMAN STUDIES OF CHAIN ​​ORIENTATION ON INJECTED POLYPROPYLENE/MONTMORILLONITE NANOCOMPOSITES. In: JOURNAL OF APPLIED POLYMER SCIENCE, 2005, no. 96, v. , pp 2377-2382.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

RAMOS GALLO, GUILLERMO JOSE · GARCIA GOMEZ, JOSE MARIA · POVEDA BERNAL, JESUS. VERSATILE MOLDS AS A TOOL FOR REDUCING COSTS AND TIMES.. In: MODERN PLASTIC MAGAZINE, 2005, n. 587, v. 89, pp 442-452.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

MERINO SENOVILLA, JUAN CARLOS · FERNÁNDEZ, JF · GARCIA LOPEZ, DAVID · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA. INFLUENCE OF CLAY MODIFICATION PROCESS IN PA6-LAYERED SILICATE NANOCOMPOSITE PROPERTIES. In: POLYMER, 2005, no. 8, v. 46, pp 2758-2765.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. FRACTIONATION PROCESS IN TREF SYSTEMS: VALIDATION OF THERMODYNAMIC MODEL AND CALCULATION PROCEDURE BY RAMAN LAM STUDIES. In: JOURNAL OF POLYMER SCIENCE PART B: POLYMER PHYSICS, 2005, no. 21, v. 43, pp 3083-3092.

Circular economy Automotive Defense Railway Naval 2006

PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. INTERPHASE EVOLUTION IN POLYMER FILMS BY CONFOCAL RAMAN MICROSPECTROSCOPY. In: APPLIED SPECTROSCOPY, 2006, no. 2, v. 60, pp 115-121.

Sustainable and Safe Smart Mobility Automotive 2006

DGT - GENERAL DIRECTORATE OF TRAFFIC · CIDAUT FOUNDATION. “IN-DEPTH” INVESTIGATIONS OF LARGE TRUCK ACCIDENTS. In: IN DEPTH, 2006, n. 8, v. , pp 1-5.

Sustainable and Safe Smart Mobility Automotive Railway 2006

MONTES LEON, LUIS ALBERTO · GARCIA SENDRA, MARIA TERESA. PREDICTIVE MAINTENANCE USING REMOTE DIAGNOSTICS AND TELEMETRY TECHNIQUES VIA SAE. In: MAINTENANCE, 2006, no. 182, v. , pp 36-49.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. LIQUID-GLASSY POLYMER DIFUSSION: RATE-CONTROLLING STEP AND DIFFUSION MECHANISM. In: MACROMOLECULES, 2005, no. 10, v. 38, pp 4355-4362.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2007

PASTOR BARAJAS, JOSE MARIA · TOMBA, JP. CONFOCAL RAMAN MICROSPECTROSCOPY WITH DRY OBJECTIVES: A DEPTH PROFILING STUDY ON POLYMER FILMS. In: VIBRATIONAL SPECTROSCOPY, 2007, no. 1, v. 44, pp 62-68.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2007

VILLARREAL BASTARDO, NORKY · MERINO SENOVILLA, JUAN CARLOS · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA · CARDENAS MORONTA, MIGUEL ANGEL. CHARACTERIZATION OF ELECTRON BEAM IRRADIATION BLENDS BASED ON METALLOCENE ETHYLENE-1-OCTENE COPOLYMER. In: JOURNAL OF POLYMER SCIENCE PART B: POLYMER PHYSICS, 2007, no. 17, v. 45, pp 2432-2440.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2006

DE CASTRO ABELLON, ISABEL · CUESTA BARBADO, RAFAEL · MAROTO SOTO, JOSE ANTONIO · MORIÑIGO SOTELO, DANIEL · MOZO RODRÍGUEZ, DAVID. WATER ANALOGUE EXPERIMENTS AS AN ACCURATE SIMULATION METHOD OF THE FILLING OF GRAVITY CASTINGS. In: TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, 2006, no. , v. 114, pp 137-150.

Energy and Mabte Sustainable and Safe Smart Mobility Automotive Defense Railway Naval 2006

MONTES LEON, LUIS ALBERTO. PREDICTIVE TECHNIQUES IN DIESEL ENGINES. In: TECNIRAIL RAILROAD & COMPANY, 2006, n. , v. , pp 17-17.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2006

· CUESTA BARBADO, RAFAEL · DELGADO PEREZ, ANGEL · MAROTO SOTO, JOSE ANTONIO · MOZO RODRÍGUEZ, DAVID. NUMERICALLY MODELING OXIDE ENTRAINMENT IN THE FILLING OF CASTINGS: THE EFFECT OF THE WEBER NUMBER. In: JOURNAL OF MINERALS, METALS AND MATERIALS SOCIETY, 2006, no. 11, v. 55, pp 62-65.

Energy and Mabte Sustainable and Safe Smart Mobility Automotive Defense Energy Naval 2006

DIEZ DE LA ROSA, ANA · MELGAR BACHILLER, ANDRES · TINAUT FLUIXA, FRANCISCO VICENTE · HORRILLO GUEMES, ALFONSO. METHOD FOR PREDICTING THE PERFORMANCE OF AN INTERNAL COMBUSTION ENGINE FUELLED BY PRODUCER GAS AND OTHER LOW HEATING VALUE GASES. In: FUEL PROCESSING TECHNOLOGY, 2006, no. 2, v. 87, pp 135-142.

Energy and Mabte Sustainable and Safe Smart Mobility Automotive Defense Energy Railway Naval 2004

DUQUE, O. · MORIÑIGO SOTELO, DANIEL · PÉREZ, M.. CHARACTERISTIC FAULTS OF INDUCTION MOTORS. FAULTS IN THE ROTOR (III). In: MAINTENANCE ENGINEERING AND MANAGEMENT, 2004, n. 35, v. 7, pp 71-78.

Energy and Mabte Sustainable and Safe Smart Mobility Automotive Defense Energy Railway Naval 2004

DUQUE, O. · MORIÑIGO SOTELO, DANIEL · PÉREZ, M.. CHARACTERISTIC FAULTS OF INDUCTION MOTORS. STATOR FAULTS (I). In: MAINTENANCE ENGINEERING AND MANAGEMENT, 2004, n. 34, v. 7, pp 79-84.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

LOPEZ QUINTANA, SONIA · MERINO SENOVILLA, JUAN CARLOS · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA · ROSALES CASTILLO, CARMEN. EFFECT OF ß-IRRADIATION ON MECHANICAL PROPERTIES OF METALLOCENE ELASTOMERS/PA6 BLENDS. In: JOURNAL FOR THE SCIENCE AND TECHNOLOGY POLYMERS, 2004, no. 23, v. 45, pp 8041-8050.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · NICOLAS MERELAS, JAVIER · RESSIA, JA · VALLES, EM. CHARACTERIZATION OF METALLOCENE EPDM TERPOLYMERS WITH HIGH DIENE AND PROPYLENE CONTENT CROSSLINKED BY DICUMYL PEROXIDE AND B-RADIATION. In: MACROMOLECULAR CHEMICAL PHYSICS, 2004, no. 15, v. 205, pp 2080-2088.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

VILLARREAL BASTARDO, NORKY · MERINO SENOVILLA, JUAN CARLOS · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA · NICOLAS MERELAS, JAVIER. THERMAL PROPERTIES AND SSA FRACTIONATION OF METALLOCENE ETHYLENE-OCT-1-ENE COPOLYMERS WITH HIGH COMONOMER CONTENT CROSS-LINKED BY DICUMYL PEROXIDE OR B-RADIATION. In: MACROMOLECULAR CHEMISTRY AND PHYSICS, 2003, no. 18 V. 204, pp 2212-2221.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

MERINO SENOVILLA, JUAN CARLOS · GARCIA LOPEZ, DAVID · PASTOR BARAJAS, JOSE MARIA · PICAZO RUIZ, OSCAR. POLYPROPYLENE-CLAY NANOCOMPOSITES: EFFECT OF COMPATIBILIZING AGENTS ON CLAY DISPERSION. In: EUROPEAN POLYMER JOURNAL, 2003, no. , v. 39, pp 945-950.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

MERINO SENOVILLA, JUAN CARLOS · GOVERNED MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA · NICOLAS MERELAS, JAVIER · VALLES, EM. OBTAINING AND CHARACTERIZATION OF CROSS-CROSSED METALOCENE POLYOLEFIN ELASTOMERS FOR INDUSTRIAL APPLICATIONS. In: MODERN PLASTICS MAGAZINE, 2003, n. 566, v. 86, pp 130-141.

Energy and Mabte Sustainable and Safe Smart Mobility Automotive Defense Energy Railway Naval 2004

DUQUE, O. · MORIÑIGO SOTELO, DANIEL · PÉREZ, M.. CHARACTERISTIC FAULTS OF INDUCTION MOTORS. FAILURES IN BEARINGS AND AXLE (II). In: MAINTENANCE ENGINEERING AND MANAGEMENT, 2004, n. 34, v. 7, pp 69-72.

Sustainable and Safe Smart Mobility Automotive 2004

HURTADO PUENTES, MIGUEL · CAÑIBANO ALVAREZ, ESTEBAN · MERINO SENOVILLA, JUAN CARLOS · ROMO GARCIA, JAVIER. THE SIMULATION OF VEHICULAR DYNAMICS AS A WAY TO IMPROVE ACTIVE SAFETY. In: DYNA ENGINEERING AND INDUSTRY, 2004, n. 1, v. 79, pp 15-20.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

GARCIA LOPEZ, DAVID · PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. LIQUID-LIQUID LIMITED-SUPPLY DIFFUSION STUDIES IN THE POLYSTYRENE-POLY(VINYL METHYL ETHER) PAIR. In: MACROMOLECULES, 2004, no. 13, v. 37, pp 4940-4948.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2005

CAÑIBANO ALVAREZ, ESTEBAN · GALLEGO CASTRO, CARLOS · ROMO GARCIA, JAVIER. APPLICATION OF PULTRUID PROFILES. In: MODERN PLASTICS MAGAZINE, 2005, n. 585, v. 89, pp 262-267.

Circular Economy Sustainable and Safe Smart Mobility Automotive 2004

CAÑIBANO ALVAREZ, ESTEBAN · SANZ MARIN, RUBEN · GONZALEZ HERNANDEZ, MANUEL IGNACIO · DIEZ ANTON, RAUL. VIBROACOUSTIC ANALYSIS SYSTEM OF CAST PARTS IN AUTOMOTIVE. In: EUROFACH ELECTRONICA. CURRENT CURRENT EVENTS AND TECHNOLOGY OF THE ELECTRONIC INDUSTRY, 2004, n. 326, v. , pp 16-17.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · POVEDA BERNAL, JESUS ​​· CARELLA, JM · ALONSO, C. · ARZONDO, LM · PINO, N.. SEQUENTIAL INJECTION OVERMOLDING OF AN ELASTOMERIC ETHYLENE-OCTENE COPOLYMER ON A POLYPROPYLENE HOMOPOLYMER CORE. In: POLYMER ENGINEERING AND SCIENCE, 2004, no. 11 V. 44, pp 2110-2116.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

GOVERNED MITER, ISABEL · GARCIA GOMEZ, JOSE MARIA · VICENTE MADERUELO, ALBERTO · SAGRADO COLLANTES, LUIS ENRIQUE. MEETING POINT OF ADVANCED TECHNOLOGIES: INJECTION MOLDS. In: MODERN PLASTICS MAGAZINE, 2004, n. 573, v. 87, pp 243-252.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

GOVERNED MITER, ISABEL · MONTOYA, M. · TOMBA, JP · CARELLA, JM. PHYSICAL CHARACTERIZATION OF COMMERCIAL POLYOLEFINIC THERMOPLASTIC ELASTOMERS. In: EUROPEAN POLYMER JOURNAL, 2004, no. 12, v. 40, pp 2757-2766.

Circular Economy Sustainable and Safe Smart Mobility Automotive 2004

NEGRO MARNE, ALBERTO · GOVERNED MITER, ISABEL · DOWN ALONSO, JULIO · MANSILLA GALLO, ALBERTO. METHODOLOGY FOR THE DEVELOPMENT IN PLASTIC MATERIALS OF NEW AUTOMOTIVE COMPONENTS WITH SAFETY REQUIREMENTS. In: MODERN PLASTICS MAGAZINE, 2004, n. 576, v. 87, pp 514-530.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2004

CUESTA BARBADO, RAFAEL · MAROTO SOTO, JOSE ANTONIO · FERNANDEZ IZQUIERDO CABALLERO, JORGE. METHODOLOGY FOR DEVELOPING SIMULATION CODES FOR FOUNDRY PROCESSES. In: ANNALS OF MECHANICAL ENGINEERING, 2004, n. , v. 2, pp 1183-1192.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. LIMITED-SUPPLY DIFFUSION IN THE LIQUID POLYSTYRENE-GLASSY POLY(PHENYLENE OXIDE) PAIR. FURTHER RESULTS IN EXTENDED TIMES SCALE. In: POLYMER, 2002, no. 25, v. 43, pp 6751-6760.

Energy and Mabte Automotive Energy Railway 2002

BRICEÑO BUENO, YOLANDA · SÁEZ CAMPO, ANA ROSA · ANTOLÍN GIRALDO, G. · TINAUT FLUIXA, FRANCISCO VICENTE · VEGAS M., LAURA. EVALUATION OF THE POTENTIAL OF VEGETABLE OIL USED TO OBTAIN BIOGASOLE IN THE COMMUNITY OF CASTILLA Y LEÓN. In: WASTE, 2002, no. 12, v. , pp 50-55.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2001

FERNANDEZ MARTINEZ, MARIA DEL ROSARIO · MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA. RAMAN MICROSCOPY OF POLYMERIC MATERIALS. In: MACROMOLECULAR SYMPOSIA, 2001, no. 1, v. 168, pp 55-66.

Sustainable and Safe Smart Mobility Automotive Defense 2001

GARCIA POLANCO, JESUS ​​ANGEL · MORENO DE CASTRO, JOSE LUIS · MANSILLA GALLO, ALBERTO. PROTECTION OF THE REAR OCCUPANTS OF A VEHICLE DURING A FRONT IMPACT. In: STA MAGAZINE OF THE SOCIETY OF AUTOMOTIVE TECHNICIANS, 2001, n. 145, v. , pp.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2001

GARCIA RUIZ, DAVID · PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. DIFFUSION OF LIQUID POLYSTYRENE INTO A GLASSY POLY(PHENYLENE OXIDE) MATRIX. DIFISION MECHANISMS AND EXPERIMENTAL VERIFICATION. In: MACROMOLECULES, 2001, no. 7, v. 34, pp 2277-2287.

Energy and Mabte Aeronautics Automotive Construction Defense Energy Railway Naval 2000

· GIMENEZ OLAVARRIA, BLANCA ... USE OF MULTIZONE COMBUSTION MODELS TO ANALYZE AND PREDICT THE EFFECT OF CYCLIC VARIATIONS ON SI ENGINES. In: SAE 2000 TRANSACTIONS, 2000, no. , v. 109, pp 1144-1151.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2000

PASTOR BARAJAS, JOSE MARIA · LAGARON, JM · SCHMIDT, P., KOLARIK, J., LEDNICKY, F., DYBAL, J.. PHASE STRUCTURE, COMPOSITION AND ORIENTATION OF PCPSAN BLENDS STUDIED BY RAMAN SPECTROSCOPY, CONFOCAL RAMAN IMAGING SPECTROSCOPY AND POLARISED PA-FTIR SPECTROSCOPY. In: POLYMER, 2000, no. 11, v. 41, pp 4267-4279.

Circular Economy Sustainable and Safe Smart Mobility Automotive 2000

MERINO SENOVILLA, JUAN CARLOS · GOVERNOR MITRE, ISABEL · SOTO LOSADA, PABLO. NEW TECHNOLOGY FOR MANUFACTURING CAR ROOF COVERINGS. In: MODERN PLASTICS JOURNAL, 2000, n. , v. 79, pp 313-324.

Sustainable and Safe Smart Mobility Aeronautics Automotive Construction Defense Railway Naval 2001

NEGRO MARNE, ALBERTO · REGIDOR GONZALEZ, ALBERTO · GARCIA LOPEZ, DAVID · MANSILLA GALLO, ALBERTO. DYNAMIC TENSILE TESTING FOR DETERMINING THE STRESS-STRAIN CURVE AT DIFFERENT STRAIN RATE. In: JOURNAL OF METALLUGY, 2001, n. 37, v. , pp 255 - 259.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

LOPEZ QUINTANA, SONIA · MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · SCHMIDT, P. · DYBAL, J. · KRATOCHVIL, J.. MICRODOMAIN STRUCTURE AND CHAIN ​​ORIENTATION IN POLYPROPYLENE/POLYETHYLENE BLENDS INVESTIGATED BY MICRO-RAMAN CONFOCAL IMAGING SPECTROSCOPY. In: POLYMER, 2002, no. 19, v. 43, pp 5187-5195.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · CARELLA, AR · ALONSO, C.. SEQUENTIAL INJECTION MOLDING OF THERMOPLASTIC POLYMERS ANALYSIS OF PROCESSING PARAMETERS FOR OPTIMAL BONDING CONDITIONS. In: POLYMER ENGINEERING AND SCIENCE, 2002, no. 11 V. 42, pp 2172-2181.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

ALONSO SASTRE, CARLOS · MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · CARELLA, AR. SEQUENTIAL INJECTION MOLDING OF THERMOPLASTIC POLYMERS. ANALYSIS OF PROCCESSING PARAMETERS FOR OPTIMAL BONDING CONDITIONS. In: POLYMER ENGINEERING AND SCIENCE, 2002, no. 11 V. 42, pp 2172-2181.

Energy and Mabte Aeronautics Automotive Construction Defense Energy Railway Naval 2002

BRICEÑO BUENO, YOLANDA · ANTOLÍN GIRALDO, G. · TINAUT FLUIXA, FRANCISCO VICENTE · CASTAÑO PEREZ, VALENTIN · PÉREZ, C. · RAMIREZ VARELA, ANA ISABEL. OPTIMISATION OF BIODIESEL PRODUCTION BY SUNFLOWER OIL, TRANSESTERIFICATION,. In: BIORESOURCE TECHNOLOGY, 2002, no. 2, v. 83, pp 111-114.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

MERINO SENOVILLA, JUAN CARLOS · FERNÁNDEZ, JF · GARCIA LOPEZ, DAVID · GOVERNADO MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA. MODIFICATION OF BENTONITES TO OBTAIN POLYMER NANOCOMPOSITES. In: MODERN PLASTICS MAGAZINE, 2003, n. 567, v. 86, pp 219-231.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

MERINO SENOVILLA, JUAN CARLOS · GARCIA LOPEZ, DAVID · PASTOR BARAJAS, JOSE MARIA. INFLUENCE OF THE CACO3 NANOPARTICLES ON THE MOLECULAR ORIENTATION OF THE POLYPROPYLENE MATRIX. In: JOURNAL OF APPLIED POLYMER SCIENCE, 2003, no. 4, v. 88, pp 947-952.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

VILLARREAL BASTARDO, NORKY · MERINO SENOVILLA, JUAN CARLOS · GOVERNADO MITRE, ISABEL · SOTO LOSADA, PABLO. DEVELOPMENT OF THERMOPLASTIC MATERIALS REINFORCED WITH AGRO-VEGETABLE FIBERS FOR OBTAINING AUTOMOTIVE COMPONENTS. In: MODERN PLASTICS MAGAZINE, 2003, n. 564, v. 85, pp 552-560.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2003

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · JAWHARI, T.. CHARACTERIZATION OF POLYMER MATERIALS THROUGH THE USE OF VIBRATIONAL MICROSPECTROSCOPY (RAMAN, FTIR AND FTRAMAN). In: REVISTA IBEROAMERICANA DE POLIMEROS, 2003, n. 3 V. 4, pp 1-44.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

VILLARREAL BASTARDO, NORKY · MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · ROSALES, C. · PERERA, R.. USE OF THE RAMAN-ACTIVE LONGITUDINAL ACOUSTIC MODE IN THE CHARACTERIZATION OF REACTIVELY EXTRUDED POLYETHYLENES. In: MACROMOLECULAR CHEMISTRY AND PHYSICS, 2002, no. 1 V. 203, pp 238-244.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

LOPEZ QUINTANA, SONIA · MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · SCHMIDT, P. · DYBAL, J. · KRATOCHVIL, J.. STRUCTURE OF POLYPROPYLENE/POLYETHYLENE BLENDS ASSESSED BY MICRO-RAMAN CONFOCAL IMAGING SPECTROSCOPY. In: JOURNAL FOR THE SCIENCE AND TECHNOLOGY POLYMERS, 2002, no. 19, v. 43, pp 5187-5195.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2002

LOPEZ QUINTANA, SONIA · PASTOR BARAJAS, JOSE MARIA · SCHMIDT, P. · DYBAL, J. · SCUDLA, J. · RAAB, M. · KRATOCHVIL, J. · EICHHORN, KJ. STRUCTURE OF POLYPROPYLENE POLYETHYLENE BLENDS ASSESSED BY POLARISED PA-FTIR SPECTROSCOPY, POLARISED FT RAMAN SPECTROSCOPY ARID CONFOCAL RAMAN MICROSCOPY. In: MACROMOLECULAR SYMPOSIA, 2002, no. 1, v. 184, pp 107-122.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1996

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · JAWHARI, T. · RODRÍGUEZ CABELLO, JUAN CARLOS. RHEO-OPTICAL RAMAN STUDY OF CHAIN ​​DEFORMATION IN UNIAXIALLY STRETCHED BULK ISOTACTIC POLYPROPYLENE. In: JOURNAL OF RAMAN SPESTROCOPY, 1996, no. 6, v. 27, pp 463-467.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1996

MERINO SENOVILLA, JUAN CARLOS · ALONSO, M. · PASTOR BARAJAS, JOSE MARIA · RODRÍGUEZ CABELLO, JUAN CARLOS. SCANNING ELECTRON MICROSCOPY AND DIFFERENTIAL SCANNING CALORIMETRY STUDY OF THE TRANSITION FRONT IN UNIAXIALLY STRETCHED LSOTACTIC POLYPROPYLENE. In: JOURNAL OF APPLIED POLYMER SCIENCE, 1996, no. , v. 60, pp 1709-1717.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1996

ALONSO, M. · PASTOR BARAJAS, JOSE MARIA · QUINTANILLA, L. · RODRÍGUEZ CABELLO, JUAN CARLOS. STRUCTURAL ANALYSIS OF POLY(ETHYLENE TEREPHTHALATE) REINFORCED WITH CLASS FIBER: THERMAL BEHAVIOR AND CORRELATION BETWEEN PA-FTIR AND DSC MEASUREMENTS. In: JOURNAL OF APPLIED POLYMER SCIENCE, 1996, no. 5, v. 59, pp 769-774.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1996

MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA · RODRIGUEZ-CABELLO, JC · SANTOS FERNANDEZ, JAVIER. THERMALLY INDUCED STRUCTURAL CHANGES IN LOW-SHRINKAGE POLY(ETHYLENE TEREPHTHALATE) FIBERS. In: JOURNAL OF POLYMER SCIENCE PART B: POLYMER PHYSICS, 1996, no. 7, v. 34, pp 1243-1255.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1997

PASTOR BARAJAS, JOSE MARIA · SCHMIDT, P. · RODA, J. · NOVAKOVA, V.. ANALYSIS OF THE CHEMICAL COMPOSITION OF POLY(E-CAPROLACTAN1)-BLOCK-POLYBUTADIENE COPOLYMERS BY PHOTOACOUSTIC FTIR SPECTROSCOPY AIID BY FT RAMAN SPECTROSCOPY. In: DIE ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1997, no. , v. 245, pp 113-123.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1998

PASTOR BARAJAS, JOSE MARIA · LAGARON, JM · RODRÍGUEZ CABELLO, JUAN CARLOS · MARTÍN-MONGE, J.. DETERMINATION OF THE CONTENT OF EXTENDED CHAIN ​​SEGMENTS IN ISOTROPIC AND UNIAXIALLY STRETCHED POLYETHYLENES BY RAMAN SPECTROSCOPY. In: MACROMOLECULAR CHEMICAL PHYSICS, 1998, no. 12, v. 199, pp 2767-2776.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1998

FERNANDEZ MARTINEZ, MARIA DEL ROSARIO · PASTOR BARAJAS, JOSE MARIA · TOMBA, JP · CARELLA, JM. DEVELOPMENT OF A SIMPLE EXPERIMENTAL METHOD TO MEASURE INTERPHASE COMPOSITION PROFILES GENERATED BY DIFFUSION IN POLYMERS. FURTHER RESULTS AND COMPARISON WITH RAMAN SPECTROSCOPY. In: MACROMOLECULAR RAPID COMMUNICATIONS, 1998, no. 8, v. 19, pp 413-417.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1999

MERINO SENOVILLA, JUAN CARLOS · SANZ MARIN, RUBEN · PASTOR BARAJAS, JOSE MARIA · MARTIN, B.. STRUCTURAL CHARACTERIZATION OF MULTILAYER POLYMER MATERIALS USING RAMAN MICROSPECTROSCOPY. In: MODERN PLASTICS MAGAZINE, 1999, n. 521, v. 78, pp 541-546.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1999

PASTOR BARAJAS, JOSE MARIA · LAGARON, JM · KIP, BJ. STRUCTURAL CHARACTERIZATION OF COLD STRETCHED POLYETHYLENE USED AS A MODEL TO STUDY THE PHENOMENON OF STRESS CRACKING IN ACTIVE MEDIA (ESC). In: MODERN PLASTICS MAGAZINE, 1999, n. 516, v. 77, pp 629-640.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2000

CAÑIBANO ALVAREZ, ESTEBAN · MERINO SENOVILLA, JUAN CARLOS · MANSILLA GALLO, ALBERTO. THE HYPERELASTIC PROBLEM USING THE FINITE ELEMENT METHOD. In: MODERN PLASTIC MAGAZINE, 2000, n. 525, v. 75, pp 289-296.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2000

FERNANDEZ MARTINEZ, MARIA DEL ROSARIO · MERINO SENOVILLA, JUAN CARLOS · PASTOR BARAJAS, JOSE MARIA. INJECTION MOLDING OF POLY(ETHYLENE TENPHTHALATE): DIFFERENTIAL SCANNING CALORIMETRY AND CONFOCAL MICRO-RAMAN SPECTROSCOPY LNVESTIGATIONS OF THE SKIN-CORE MORPHOLOGY*. In: POLYMER ENGINEERING AND SCIENCE, 2000, no. 1 V. 40, pp 95-107.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 2000

FERNANDEZ MARTINEZ, MARIA DEL ROSARIO · MERINO SENOVILLA, JUAN CARLOS · GOVERNED MITRE, ISABEL · PASTOR BARAJAS, JOSE MARIA. MOLECULAR AND LAMELLAR ORIENTATION OF A- AND B-TRANSCRYSTALLINE LAYERS IN POLYPROPYLENE COMPOSITES BY POLARIZED CONFOCAL MICRO-RAMAN SPECTROSCOPY: RAMAN IMAGING BY STATIC POINT ILLUMINATION. In: APPLIED SPECTROSCOPY, 2000, no. 54, v. 8, pp 1105-1113.

Circular economy Aeronautics Automotive Construction Defense Railway Naval 1997

FERNANDEZ MARTINEZ, MARIA DEL ROSARIO · PASTOR BARAJAS, JOSE MARIA · SCHMIDT, P. · RODA, J.. STUDY OF THE CONFORMATIONS OF POLY(E-CAPROLACTAM) AND POLY(E-CAPROLACTAM)-POLYBUTADIENE BLOCK COPOLYMERS BY FT IR SPECTROSCOPY WITH PHOTOACOUSTIC DETECTION AND BY MICRO-RAMAN CONFOCAL SPECTROSCOPY. In: POLYMER, 1997, no. 9, v. 38, pp 2067-2075.

Supplier policy

Guidelines for the evaluation, selection, performance monitoring and re-evaluation of external suppliers of the CIDAUT Foundation

1. Object

This document is established to inform CIDAUT Foundation suppliers of the general guidelines followed for the evaluation, selection, performance monitoring and re-evaluation of external suppliers.

2 Area of ​​application

In accordance with the requirements of ISO 9001:2015, this document applies to external suppliers of the CIDAUT Foundation that supply products and services that may adversely affect the ability to deliver the results of the projects, technological services and tests that develops the CIDAUT Foundation. Below is a non-exhaustive list of processes, products and services to which these guidelines would apply:

Services and/or processes of:

  • tests, proficiency tests, calibrations or sampling
  • design
  • manufacturing of parts, molds, tools, electrical and/or electronic components, elements or assemblies necessary for the manufacture of prototypes, machines or any element that will be delivered to the client or on which tests or tests will be carried out that will constitute the results to deliver to the customer
  • analysis, evaluation, audit or technical advice whose conclusions and/or results will be integrated into the results to be delivered to the client
  • development of specific facilities for the development of projects, technological services or trials
  • key support services that can affect the outcome of projects, technological services or tests: maintenance of facilities and equipment, software administration and maintenance, etc.

Products

  • standards and auxiliary equipment for calibration/verification of measurement and monitoring equipment
  • reference elements and materials
  • measurement and monitoring equipment
  • raw materials that must meet specific requirements of the Project, Technological Service or Test
  • materials, reagents, additives, etc. necessary for the development of a new material that will be the result of the technological project or service or on which the tests or tests that will constitute the outputs/results of the technological project or service will be carried out.
  • consumables that must meet specific requirements for the correct operation of key equipment / installation for the development of the project, technological service or test
  • key equipment and facilities for the development of the project, technological service or test
  • software that can determine the results of the project, technological service or test (CAD/CAE/CAM)

3. Development
3.1. Evaluation and selection of suppliers
The Foundation Purchasing Manager establishes the criteria based on which the evaluation and selection is carried out in order to guarantee that the selected supplier supplies the products and services in accordance with the necessary requirements. The selection criteria are a combination of the following depending on the type of product/service:

  • Ability to meet legal requirements and customer requirements
  • Adaptation to the specific need: For complex products/services, the proposal of the supplier that best meets the need
  • Technical Capacity: The supplier has the appropriate material and human resources
  • ENAC accreditations: The supplier is accredited by ENAC for the development of calibrations, tests, etc.
  • Certifications: The supplier has a current ISO 9001 certification and within its scope are the products and/or services that are the object of the need.
  • Provider recommended or established by the Client
  • Previous experience: Provider in other departments or projects
  • Market recognition
  • References from clients, competitors, etc.
  • Risk and guarantees: Level of risk assumed by the supplier and/or guarantees offered
  • Financial Capacity: For large purchases
  • Supply Capacity
  • Flexibility towards changes
  • Accessibility
  • Ability to meet deadlines
  • Price
  • Payment method
In addition to the established criteria, whenever possible, for purchases exceeding the amount of 3.000? The selection of the supplier will be carried out by requesting offers from at least 3 suppliers.

3.2. Monitoring performance and reevaluation of suppliers.
To ensure that controlled external suppliers continue to supply in accordance with established requirements, suppliers are subject to periodic monitoring and control. Depending on the type of provider, it is established:

Supplier type Tracking Re-evaluation
Regular: regular suppliers X X
About project: specific suppliers for a given project X Does not apply
Occasional: single purchase suppliers Does not apply Does not apply

Tracking
Monitoring of external suppliers is carried out continuously:

  • Checking the maintenance of the ISO 9001 certification or ENAC accreditation that served as the basis for the approval. In case of loss, approval could be withdrawn.
  • Checking compliance with commercial agreements
  • Review of the quality of purchases made.
  • Anomalies attributable to the supplier are tracked. When an incident gives rise to a customer claim or significantly affects the outputs or results of the project, technological service or test, a Non-conformity is opened. When the supplier's response is not adequate or when the severity of the anomaly causes the CIDAUT Foundation to lose confidence in the supplier, the approval is withdrawn.
Continuous monitoring also takes into account response times and price developments. When necessary, the Purchasing Manager may define other monitoring activities. Some possible follow-ups are:
  • Audits
  • Service quality reviews
  • Visits to the supplier
  • Product inspections
  • Monitoring of indicators
  • Meetings with service users

Re-evaluation
Regular suppliers are periodically re-evaluated. For this, it is reviewed:

  • the criteria by which they were initially approved
  • the maintenance of ISO 9001 certification or ENAC accreditation if they were determining elements in the approval of the supplier
  • compliance with trade agreements
  • the history of incidents and follow-ups carried out
  • the level of service of the provider taking into account in particular unanswered requests, response times and accessibility
  • price variations and its comparison with other competitors

Guarantee of impartiality

Impartiality and independence are basic principles of the CIDAUT Foundation's activity. CIDAUT Foundation acts impartially and independently of all types of pressures, whether commercial or otherwise, in its activities and services provided to clients, institutions and organizations.

CIDAUT Foundation continuously evaluates each possible conflict/risk that may affect the independence and impartiality of its activities, carrying out the pertinent consultations and inquiries to ensure that it does not incur any incompatibility and loss of independence in the aforementioned terms. Limiting activity and/or implementing relevant actions in case of doubt or conflict.

Personal Data Protection Policy

The personal data to be protected includes all those that are processed by us (whether data of clients, potential clients, suppliers, workers, contacts, external collaborators, etc.).


Therefore, both FUNDACION CIDAUT, and all its staff, whether internal or external, who are involved in some way in the processing of personal data, must:

  • Maintain secrecy and confidentiality of the information processed.
  • Protect the personal data you are processing and safeguard it so that unauthorized personnel do not have access to it.
  • Comply with data protection principles (legality, loyalty and transparency, limitation of purpose, data minimization, accuracy, limitation of retention period, integrity and confidentiality and proactive responsibility).
  • Guarantee that interested parties can exercise their rights (information, access, rectification, deletion, limitation of processing, data portability, opposition and automated individual decisions).
  • Comply with, and where appropriate, enforce, the controls and security measures that FUNDACION CIDAUT has implemented to protect the security of personal data, preventing the confidentiality, integrity or availability of said data from being compromised.
  • Immediately communicate, according to the procedures enabled for this purpose, any incidents that may affect the security of personal data and that may compromise its confidentiality, integrity or availability, as well as non-compliance with the requirements established by the personal data protection regulations.
  • Comply with all legal requirements and obligations imposed by personal data protection regulations.

Information Security Policy

CIDAUT FOUNDATION (hereinafter, CIDAUT) is an entity dedicated to research and development in Transportation and Energy, with the objective of enhancing competitiveness and industrial development in companies in the transportation, energy and industry sectors in general. .

Aware of the importance that information security has for the development of its business, it has decided to implement a management system and subscribes to this policy.

CIDAUT establishes, defines and reviews objectives within its Information Security Management System (ISMS) aimed at improving its security, understanding it as the preservation of the confidentiality, availability and integrity of its information, as well as the systems that support it. support, increasing the confidence of our customers and other interested parties; along with compliance with all applicable legal, regulatory and contractual requirements.

The design, implementation and maintenance of the ISMS will be supported by the results of a continuous risk analysis and management process from which the actions to be carried out in terms of security within the scope of its system are derived, which is:

"Information systems that support the processes linked to the implementation of research, development and technological innovation projects, technological services and tests in the areas of: product design, energy and environment, materials, transformation processes, safety in vehicles, road safety, mobility, acoustics and vibrations and information technologies and industry 4.0 that are of interest to the industry in general and especially to the transport and energy sectors."

The CIDAUT Management will establish the risk evaluation criteria so that all scenarios that imply an unacceptable level of risk are treated appropriately.

As part of the ISMS, Management will develop, implement and keep updated a Business Continuity Plan according to the needs of the company and dimensioned to the risks that affect it.

The CIDAUT Management is committed to the implementation, maintenance and improvement of the ISMS, providing it with those means and resources that are necessary and urging all staff to assume this commitment. To this end, CIDAUT will implement the measures required for the training and awareness of personnel with information security. In turn, when workers fail to comply with safety policies, Management reserves the right to apply disciplinary measures in accordance with the application agreement and within the applicable legal framework, and according to the impact this has on the organization.

Everything defined in this policy will be specified and developed in regulations and procedures of the ISMS, which will be integrated to the extent possible with other management systems of the organization, sharing those resources in favor of optimization and seeking continuous improvement of the efficiency and effectiveness of process management.

Every user will have the obligation to report security incidents using the guidelines established by CIDAUT.

This policy will apply to all personnel and resources that are within the scope of the ISMS, it is brought to their attention and is communicated to all interested parties.

Privacy summary

This website uses cookies so that we can offer you the best possible user experience. The information of the cookies is stored in your browser and performs functions such as recognizing you when you return to our website or helping our team understand which sections of the website you find most interesting and useful.