Master's thesis 2023

Structural analysis of the i-bike vehicles present in the European Avangard project

Writers: Pedrosa Valbuena, Adrian
Date: 2 / 02 / 2023
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Esteban Cañibano Alvarez, Juan Carlos Merino Senovilla
Final Degree Project 2022

Study of support and financing instruments for business R&D activities

Writers: Escalante Veliz, Sara
Date: 22 / 07 / 2022
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Business Organization and Marketing and Market Research
Tutors: Maria Teresa Fernandez Peña, Javier Pajares Gutierrez
Master's thesis 2022

Study and analysis of the safety regulations for electric and hybrid vehicles and their application to crash installations

Writers: Juanes Mayfield, Beatriz
Date: 1 / 02 / 2022
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Electric engineering
Managers: Susana Maria Escalante Castrodeza Daniel Moriñigo Sotelo
Final Degree Project 2022

Simulation of the forming of high-performance thermoplastic materials

Writers: Corrionero Izquierdo, Ane Miren
Date: 18 / 08 / 2022
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez, Jesús Magdaleno Martín
Final Degree Project 2022

Knowledge management with the new technologies of industry 4.0

Writers: Zumeta Pérez, Alicia
Date: 14 / 03 / 2022
School: Higher Polytechnic School (MIGUEL DE CERVANTES EUROPEAN UNIVERSITY)
Managers: Maria Teresa Fernandez Peña, Vanesa Fernández Cavero
Thesis 2021

Study of combustion of hydrogen and natural gas mixtures in spark ignition engines. Cyclic dispersion measurement

Writers: Perez Rodriguez, Alvaro
Date: 12 / 07 / 2021
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Managers: Andres Melgar Bachelor
Final Degree Project 2021

Vision-based autonomous robots

Writers: Count Osorio, Marcos V.
Date: 28 / 07 / 2021
School: School of Computer Engineering (UNIVERSITY OF VALLADOLID)
Department: Computing
Managers: Alvaro Garcia Garcia, Manuel Barrio Solorzano
Master's thesis 2021

A new synthesis route for obtaining isocyanate-free polyurethane foams

Writers: Amezua Arranz, Clara
Date: 4 / 01 / 2021
School: Faculty of Sciences (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Mercedes Santiago Calvo, Miguel Angel Rodriguez Perez
Final Degree Project 2021

Analysis, interpretation and reinforcement of cybersecurity in convergent environments towards industry 4.0

Writers: Rodriguez Nuñez, Enrique
Date: 21 / 07 / 2021
School: School of Computer Engineering (UNIVERSITY OF VALLADOLID)
Department: Computing
Managers: Alvaro Garcia Garcia Valentín Cardeñoso Payo
Final Degree Project 2020

Development of predictive models in an industrial manufacturing environment

Writers: Martin Mateos, Miguel
Date: 23 / 07 / 2020
School: School of Computer Engineering (UNIVERSITY OF VALLADOLID)
Department: Computing
Managers: Alvaro Garcia Garcia Valentín Cardeñoso Payo
Master's thesis 2020

Rigid polyurethane foams reinforced with graphite-functionalized nanosepiolites

Writers: Carracedo-Perez, Maria
Date: 2 / 01 / 2020
School: Faculty of Sciences (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Mercedes Santiago Calvo, Fernando Villafañe Gonzalez
Final Degree Project 2020

Construction of a semi-automatic learning operator assistance system

Writers: Manzano Santos, Adrian
Date: 27 / 07 / 2020
School: School of Computer Engineering (UNIVERSITY OF VALLADOLID)
Department: Computing
Managers: Alvaro Garcia Garcia, Anibal Bregon Bregon
Thesis 2020

Research and development of advanced and sustainable materials for a new thermoplastic pultrusion application

Writers: Asensio Valentin, María
Date: 2 / 01 / 2020
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas, Karina Nuñez Carrero
Master's thesis 2020

Integration of THOR 50 mannequin in safety laboratory

Writers: Fernández Chana, Leonardo
Date: 7 / 01 / 2020
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Tutors: Susana Maria Escalante Castrodeza, Jesus Vazquez De Prada Martinez
Final Degree Project 2019

Application of big data techniques to air conditioning systems

Writers: Chen, An
Date: 9 / 07 / 2019
School: School of Computer Engineering (UNIVERSITY OF VALLADOLID)
Department: Computing
Managers: Alvaro Garcia Garcia, Quiliano Isaac Moro Sancho
Thesis 2018

Development of polyamide/sepiolite nanocomposites for industrial applications

Writers: Herrero Villar, Manuel
Date: 2 / 01 / 2018
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas, Karina Nuñez Carrero
Final Year Project 2018

Development of energy absorption elements made of tubes

Writers: Izquierdo Higuero, Jose Ramon
Date: 1 / 03 / 2018
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Esteban Cañibano Alvarez, Juan Carlos Merino Senovilla
Master's thesis 2017

Characterization and in-situ analysis of the cellular structure and foaming process of airgel-polyurethane composites by means of x-ray radioscopy and tomography

Writers: Cimavilla Roman, Paula
Date: 2 / 01 / 2017
School: Faculty of Sciences (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Mercedes Santiago Calvo, Miguel Angel Rodriguez Perez, Saul Perez Tamarit
Master's thesis 2016

Study of occupant retention systems and criteria for the approval of a vehicle in the US and USA

Writers: Ruíz Sánchez, Sergio
Date: 19 / 01 / 2016
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Tutors: Susana Maria Escalante Castrodeza
Final Year Project 2015

Structural and aesthetic optimization of the Illumetric system

Writers: Fernández Raposo, Victor
Date: 6 / 02 / 2015
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Tutors: Pilar Legido Fernandez
Managers: Jesus Angel Real Cortes
Final Year Project 2014

Implementation of an elastoplastic behavior model with Young's modulus dependent on plastic deformation and Chaboche hardening. Application to forming processes

Writers: Pallares De Soto, Jose Adolfo
Date: 28 / 11 / 2014
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Tutors: Manuel Ignacio Gonzalez Hernandez
Managers: Blanca Araujo Perez
Final Year Project 2014

Vibratory analysis of the distribution of elastic supports between two plates, based on the finite element method

Writers: Ortiz Brunicardi, Luis Arturo
Date: 4 / 07 / 2014
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Tutors: Angelica Sanchez Bragado
Final Year Project 2014

Microstructural modification of alloys A356 and AZ91 under the influence of electromagnetic stirring during solidification

Writers: Jacobo Martin, Alejandra
Date: 3 / 10 / 2014
School: Rey Juan Carlos University (UNIVERSITY OF MADRID)
Managers: Ana Rivas Salmon, Joaquin Rams Ramos
Thesis 2014

Corrosion resistance in contact with molten aluminum of metallic materials and coatings by plasma electrolytic oxidation

Writers: Rivas Salmon, Ana
Date: 3 / 02 / 2014
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Jose Antonio Maroto Soto, Juan Carlos Merino Senovilla
Final Year Project 2014

Development of a methodology for the characterization of alloys in situ using thermal analysis techniques

Writers: Perez Sevillano, Pablo
Date: 4 / 07 / 2014
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Juan Carlos Merino Senovilla
Managers: Roberto Manuel Alvarez Lopez
Final Year Project 2013

Damage prediction in composite materials

Writers: Alanis Garcia, Sofia Elena
Date: 16 / 12 / 2013
School: UNIVERSITY OF MONTERREY
Tutors: Esteban Cañibano Alvarez
Managers: Cesar Maestro Martin
Final Year Project 2013

Prediction of distortions in composite materials

Writers: Garza Cavazos, Lorena
Date: 16 / 12 / 2013
School: UNIVERSITY OF MONTERREY
Tutors: Esteban Cañibano Alvarez
Managers: Cesar Maestro Martin
Final Year Project 2013

Vibratory calculation methodology using finite elements for random excitations

Writers: Blacksmith Benito, Marta
Date: 8 / 02 / 2013
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Angelica Sanchez Bragado, José María Teran
Final Year Project 2013

Development of a CO2 capture technique aimed at coal-fired power generation facilities

Writers: Dominguez Santos, Mª Blanca
Date: 1 / 07 / 2013
School: School of Chemical Engineering (UNIVERSITY OF VALLADOLID)
Managers: Jose Ignacio Dominguez Carrero
Thesis 2013

Optimization of injection polypropylene foaming for automotive applications based on design of experiments.

Writers: Contreras Azcarate, Vicente
Date: 23 / 10 / 2013
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas
Thesis 2013

Automotive restraint system development tools based on artificial intelligence

Writers: Martin Macias, Roberto
Date: 3 / 06 / 2013
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Materials Science and Metallurgical Engineering, Graphic Expression in Engineering, Cartographic Engineering, Geodesy and Photogrammetry, Mechanical Engineering and Manufacturing Process Engineering
Managers: Alberto Mansilla Gallo
Thesis 2012

In situ polymerization of metallocene polyolefins loaded with nanosepiolite

Writers: Nuñez Carrero, Karina
Date: 11 / 10 / 2012
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas
Thesis 2012

Phenomena of inclusion of non-metallic phases in the filling of foundry molds

Writers: Cuesta Barbado, Rafael
Date: 6 / 09 / 2012
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Jose Antonio Maroto Soto, Juan Carlos Merino Senovilla
Final Year Project 2012

Study of the application of the finite element method to the dimensioning of aeronautical structural joints

Writers: Caminero De La Fuente, Angel Luis
Date: 2 / 04 / 2012
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez
Managers: Blanca Araujo Perez
Thesis 2012

Design methodology for polyolefin matrix composite materials reinforced with discontinuous fibers for transportation applications

Writers: Poveda Bernal, Jesus
Date: 26 / 11 / 2012
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas
Final Year Project 2011

Definition, design and development of a system for monitoring and recording extraction operations in earth-moving machines, for the optimization of the design of teeth in penetration and wear, and in the face of static and fatigue loads

Writers: Mediero Muñoyerro, Luis
Date: 4 / 02 / 2011
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Managers: Alberto Mansilla Gallo, Alberto Regidor Gonzalez
Final Year Project 2011

Design development project and calculation of structure and foundation for photovoltaic solar parking

Writers: Aparicio Sanz, Roberto
Date: 3 / 01 / 2011
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez, Luis Miguel Sanchez Estevez
Final Year Project 2011

Design and implementation of the control system of a magnetohydrodynamic pump for molten metal dosing

Writers: Romanillos Pelaez, Jose Maria
Date: 1 / 12 / 2011
School: Higher Technical School of Telecommunications Engineers (UNIVERSITY OF VALLADOLID)
Department: Electricity and electronic
Tutors: Helena Castan Lanaspa
Managers: Ana Rivas Salmon
Final Year Project 2011

Design and development of an electric, light, innovative and versatile three-wheeled vehicle

Writers: Sanz Lopez, Javier
Date: 24 / 05 / 2011
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Esteban Cañibano Alvarez, Juan Carlos Merino Senovilla
Final Year Project 2011

Collection and shredding of forestry waste

Writers: Martin Moro, Sergio
Date: 29 / 07 / 2011
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Tutors: Esteban Cañibano Alvarez
Managers: Luis Antonio Nieto De La Fuente
Final Year Project 2011

Study of the feasibility of a hybrid hydraulic system in a garbage collection truck

Writers: Nieto Garcia, Cristina
Date: 1 / 02 / 2011
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez
Managers: Javier Romo Garcia
Final Year Project 2011

Optimization of the filling stage of the EPGS casting process in green sand molds

Writers: Alvarez Lopez, Roberto Manuel
Date: 1 / 02 / 2011
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez
Managers: Maria Estibaliz Mayor of La Cuesta
Final Year Project 2011

Design, implementation and evaluation of five different human-computer interfaces for the communication of people with severe neuromotor deficiencies in childhood.

Writers: Muñoz Salgado, Guillermo
Date: 3 / 10 / 2011
School: Higher Technical School of Telecommunications Engineers (UNIVERSITY OF VALLADOLID)
Department: Signal Theory, Communications and Telematics Engineering
Tutors: Jaime Gómez Gil
Managers: Miguel Gomez Ramirez De Verger
Thesis 2010

ABS and sepiolite nanocomposites for automotive applications. Preparation and characterization

Writers: Basurto Garcia, Felix Carlos
Date: 3 / 06 / 2010
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas
Final Year Project 2010

Mathematical model for the study and sizing of VCI, VE and VHE-S

Writers: Marchan Higuera, JA
Date: 1 / 06 / 2010
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez
Managers: Manuel Ignacio Gonzalez Hernandez, Javier Romo Garcia
Thesis 2010

Plasticization rheology of light alloys in semi-solid state

Writers: Maroto Soto, Jose Antonio
Date: 19 / 11 / 2010
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Esteban Cañibano Alvarez, Juan Carlos Merino Senovilla
Final Year Project 2010

Scale design of an open system for the cultivation of microalgae

Writers: Dubois, Renaud
Date: 1 / 02 / 2010
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Chemical engineering
Tutors: Alfonso Horrillo Guemes
Managers: Jose Ignacio Dominguez Carrero
Final Year Project 2010

Vehicle instrumentation for road monitoring

Writers: Conde Recio, Fernando
Date: 1 / 02 / 2010
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Electronic Technology
Tutors: Alberto Senen Perales Garcia
Final Year Project 2010

Design and implementation of an autonomously illuminated vertical road sign, in accordance with the standard (8.1-IC) for optimal visibility conditions

Writers: Bueno Gallego, Juan Ignacio
Date: 1 / 02 / 2010
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Electronic Technology
Tutors: Francisco Javier Burgoa Roman, Jesus Angel Real Cortes
Final Year Project 2010

Design and construction of a new structure for a parabolic solar collector

Writers: Cobo Ceballos, Álvaro
Date: 1 / 06 / 2010
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez
Final Year Project 2010

Cerro del Viento wind park

Writers: Gomez Jimenez, Angel
Date: 1 / 06 / 2010
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Esteban Cañibano Alvarez
Final Year Project 2010

Design and development of a chamber for carrying out cryogenic treatments

Writers: Garcia Martin, Ivan
Date: 1 / 05 / 2010
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Architectural Constructions, Terrain Engineering and Mechanics of Continuous Media and Theory of Structures
Tutors: Luis De Prada Martin
Managers: Esteban Cañibano Alvarez
Final Year Project 2010

Development of new simulation models for the prediction of the blowing defect produced by sand cores in casting processes

Writers: Rivas Gutierrez, Jose Antonio
Date: 3 / 05 / 2010
School: School of Industrial Engineering (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla, Rafael Cuesta Barbado
Final Year Project 2009

Driver behavior and driver distractions

Writers: Llamazares Martínez, Ignacio
Date: 1 / 06 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Jose Maria Pastor Barajas
Managers: Manbir Sodhi
Final Year Project 2009

Determination of concentration sections of traffic accidents with victims, a statistical analysis

Writers: Herrero Rodríguez, Jose Manuel
Date: 1 / 07 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Statistics
Managers: David Pedrero Muriel, Francisco Jose Lopez Valdes
Final Year Project 2009

Integrated system for environmental noise control

Writers: Parra Ojero, Sergio
Date: 1 / 09 / 2009
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Applied Physic
Tutors: Ana Isabel Tarrero Fernandez, Maria Angeles Martin Bravo
Final Year Project 2009

Integrated design in road infrastructure: application of dynamic calculation, structural optimization and analysis of the human factor to the improvement of a safety barrier

Writers: Fernandez Duarte, Lucia
Date: 6 / 11 / 2009
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Materials Science and Metallurgical Engineering, Graphic Expression in Engineering, Cartographic Engineering, Geodesy and Photogrammetry, Mechanical Engineering and Manufacturing Process Engineering
Tutors: Alberto Negro Marne
Managers: Ignacio Fraile Arranz
Final Year Project 2009

Advanced simulation of plastic materials: evaluation of the SAMP-1 material law in lS-Dyna

Writers: Gomez De La Rua, Miguel Angel
Date: 11 / 09 / 2009
School: Higher Polytechnic School (UNIVERSITY OF BURGOS)
Managers: Daniel Muñoz Valentin
Final Year Project 2009

Simulation with CFS in porous medium of an ATR reactor

Writers: Perez Rodriguez, Alvaro
Date: 11 / 09 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Tutors: Alejandro Izquierdo De Francisco
Final Year Project 2009

Automatic calculation of distances to road delimitation lines and test management systems for a road monitoring system

Writers: De La Cruz Oñate, Angela
Date: 19 / 10 / 2009
School: Higher Technical School of Telecommunications Engineers (UNIVERSITY OF VALLADOLID)
Department: ITI Systems
Tutors: Miguel Ángel García Blanco
Managers: Diego Ortiz De Lejarazu Machin
Final Year Project 2009

Study of current energy certification tools applied to a residential building. Implementation of bioclimatic solutions for energy savings

Writers: Cebrian Renedo, Isabel
Date: 13 / 03 / 2009
School: School of Chemical Engineering (UNIVERSITY OF VALLADOLID)
Department: Chemical engineering
Tutors: Alejandro Izquierdo De Francisco
Final Year Project 2009

Design of an automatic cutting machine for meat processing in the rabbit sector, using modular structures from extruded aluminum

Writers: Prieto Bermejo, Celeste
Date: 1 / 06 / 2009
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Technical Engineering in Industrial Design
Tutors: Esteban Cañibano Alvarez
Managers: Manuel Ignacio Gonzalez Hernandez
Thesis 2009

Definition and development of a multidisciplinary methodology for the design and development of cast brake discs for the automotive industry.

Writers: Gonzalez Hernandez, Manuel Ignacio
Date: 8 / 07 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Esteban Cañibano Alvarez, Juan Carlos Merino Senovilla
Final Year Project 2009

Vibroacoustic characterization of an electrodynamic excitation bench

Writers: Gomez Sanchez, Ines
Date: 1 / 07 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Materials Science and Metallurgical Engineering, Graphic Expression in Engineering, Cartographic Engineering, Geodesy and Photogrammetry, Mechanical Engineering and Manufacturing Process Engineering
Tutors: Marta Herráez Sánchez
Managers: Miguel Angel Morcillo Lopez
Final Year Project 2009

Implementation and validation of a calculation model for the analysis of the bending of welded tubes considering the Springback

Writers: Pallares De Soto, Jose Adolfo
Date: 2 / 03 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Managers: Esteban Cañibano Alvarez, Javier Romo Garcia
Final Year Project 2009

Analysis of the bending of welded tubes considering the Springback and validation of the calculations with experimental tests and simulation

Writers: Borondo Molpeceres, Virginia
Date: 1 / 06 / 2009
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Tutors: Esteban Cañibano Alvarez
Managers: Javier Romo Garcia
Final Year Project 2009

Research in multisensory systems for accident prevention by identifying the state of road infrastructure

Writers: Perez Crespo, Silvia
Date: 2 / 02 / 2009
School: Higher Technical School of Telecommunications Engineers (UNIVERSITY OF VALLADOLID)
Tutors: Alonso Alonso Alonso
Managers: Jesus Angel Real Cortes
Thesis 2008

Methodology for the diagnosis of the laminar combustion speed of fuel gas mixtures from the measurement of the instantaneous pressure in a combustion pump at constant volume

Writers: Lafuente Lafuente, Alvaro
Date: 29 / 09 / 2008
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Managers: Alfonso Horrillo Guemes
Final Year Project 2008

Creation and validation of a model for the study of cervical injuries due to traffic accidents

Writers: Chiriac, Marian
Date: 1 / 12 / 2008
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Materials Science and Metallurgical Engineering, Graphic Expression in Engineering, Cartographic Engineering, Geodesy and Photogrammetry, Mechanical Engineering and Manufacturing Process Engineering
Tutors: Felipe Montoya Moreno
Managers: Alberto Mansilla Gallo
Final Year Project 2008

Optimization of the design of polymeric components against impact through the application of high-speed photogrammetry to obtain the real stress-real deformation law of the material

Writers: Ferrer Revenga, Jose Javier
Date: 2 / 06 / 2008
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Graphic Expression in Engineering
Tutors: Esteban Cañibano Alvarez
Managers: Alberto Regidor Gonzalez

Supplier policy

Guidelines for the evaluation, selection, performance monitoring and re-evaluation of external suppliers of the CIDAUT Foundation

1. Object

This document is established to inform CIDAUT Foundation suppliers of the general guidelines followed for the evaluation, selection, performance monitoring and re-evaluation of external suppliers.

2 Area of ​​application

In accordance with the requirements of ISO 9001:2015, this document applies to external suppliers of the CIDAUT Foundation that supply products and services that may adversely affect the ability to deliver the results of the projects, technological services and tests that develops the CIDAUT Foundation. Below is a non-exhaustive list of processes, products and services to which these guidelines would apply:

Services and/or processes of:

  • tests, proficiency tests, calibrations or sampling
  • design
  • manufacturing of parts, molds, tools, electrical and/or electronic components, elements or assemblies necessary for the manufacture of prototypes, machines or any element that will be delivered to the client or on which tests or tests will be carried out that will constitute the results to deliver to the customer
  • analysis, evaluation, audit or technical advice whose conclusions and/or results will be integrated into the results to be delivered to the client
  • development of specific facilities for the development of projects, technological services or trials
  • key support services that can affect the outcome of projects, technological services or tests: maintenance of facilities and equipment, software administration and maintenance, etc.

Products

  • standards and auxiliary equipment for calibration/verification of measurement and monitoring equipment
  • reference elements and materials
  • measurement and monitoring equipment
  • raw materials that must meet specific requirements of the Project, Technological Service or Test
  • materials, reagents, additives, etc. necessary for the development of a new material that will be the result of the technological project or service or on which the tests or tests that will constitute the outputs/results of the technological project or service will be carried out.
  • consumables that must meet specific requirements for the correct operation of key equipment / installation for the development of the project, technological service or test
  • key equipment and facilities for the development of the project, technological service or test
  • software that can determine the results of the project, technological service or test (CAD/CAE/CAM)

3. Development
3.1. Evaluation and selection of suppliers
The Foundation Purchasing Manager establishes the criteria based on which the evaluation and selection is carried out in order to guarantee that the selected supplier supplies the products and services in accordance with the necessary requirements. The selection criteria are a combination of the following depending on the type of product/service:

  • Ability to meet legal requirements and customer requirements
  • Adaptation to the specific need: For complex products/services, the proposal of the supplier that best meets the need
  • Technical Capacity: The supplier has the appropriate material and human resources
  • ENAC accreditations: The supplier is accredited by ENAC for the development of calibrations, tests, etc.
  • Certifications: The supplier has a current ISO 9001 certification and within its scope are the products and/or services that are the object of the need.
  • Provider recommended or established by the Client
  • Previous experience: Provider in other departments or projects
  • Market recognition
  • References from clients, competitors, etc.
  • Risk and guarantees: Level of risk assumed by the supplier and/or guarantees offered
  • Financial Capacity: For large purchases
  • Supply Capacity
  • Flexibility towards changes
  • Accessibility
  • Ability to meet deadlines
  • Price
  • Payment method
In addition to the established criteria, whenever possible, for purchases exceeding the amount of 3.000? The selection of the supplier will be carried out by requesting offers from at least 3 suppliers.

3.2. Monitoring performance and reevaluation of suppliers.
To ensure that controlled external suppliers continue to supply in accordance with established requirements, suppliers are subject to periodic monitoring and control. Depending on the type of provider, it is established:

Supplier type Tracking Re-evaluation
Regular: regular suppliers X X
About project: specific suppliers for a given project X Does not apply
Occasional: single purchase suppliers Does not apply Does not apply

Tracking
Monitoring of external suppliers is carried out continuously:

  • Checking the maintenance of the ISO 9001 certification or ENAC accreditation that served as the basis for the approval. In case of loss, approval could be withdrawn.
  • Checking compliance with commercial agreements
  • Review of the quality of purchases made.
  • Anomalies attributable to the supplier are tracked. When an incident gives rise to a customer claim or significantly affects the outputs or results of the project, technological service or test, a Non-conformity is opened. When the supplier's response is not adequate or when the severity of the anomaly causes the CIDAUT Foundation to lose confidence in the supplier, the approval is withdrawn.
Continuous monitoring also takes into account response times and price developments. When necessary, the Purchasing Manager may define other monitoring activities. Some possible follow-ups are:
  • Audits
  • Service quality reviews
  • Visits to the supplier
  • Product inspections
  • Monitoring of indicators
  • Meetings with service users

Re-evaluation
Regular suppliers are periodically re-evaluated. For this, it is reviewed:

  • the criteria by which they were initially approved
  • the maintenance of ISO 9001 certification or ENAC accreditation if they were determining elements in the approval of the supplier
  • compliance with trade agreements
  • the history of incidents and follow-ups carried out
  • the level of service of the provider taking into account in particular unanswered requests, response times and accessibility
  • price variations and its comparison with other competitors

Guarantee of impartiality

Impartiality and independence are basic principles of the CIDAUT Foundation's activity. CIDAUT Foundation acts impartially and independently of all types of pressures, whether commercial or otherwise, in its activities and services provided to clients, institutions and organizations.

CIDAUT Foundation continuously evaluates each possible conflict/risk that may affect the independence and impartiality of its activities, carrying out the pertinent consultations and inquiries to ensure that it does not incur any incompatibility and loss of independence in the aforementioned terms. Limiting activity and/or implementing relevant actions in case of doubt or conflict.

Personal Data Protection Policy

The personal data to be protected includes all those that are processed by us (whether data of clients, potential clients, suppliers, workers, contacts, external collaborators, etc.).


Therefore, both FUNDACION CIDAUT, and all its staff, whether internal or external, who are involved in some way in the processing of personal data, must:

  • Maintain secrecy and confidentiality of the information processed.
  • Protect the personal data you are processing and safeguard it so that unauthorized personnel do not have access to it.
  • Comply with data protection principles (legality, loyalty and transparency, limitation of purpose, data minimization, accuracy, limitation of retention period, integrity and confidentiality and proactive responsibility).
  • Guarantee that interested parties can exercise their rights (information, access, rectification, deletion, limitation of processing, data portability, opposition and automated individual decisions).
  • Comply with, and where appropriate, enforce, the controls and security measures that FUNDACION CIDAUT has implemented to protect the security of personal data, preventing the confidentiality, integrity or availability of said data from being compromised.
  • Immediately communicate, according to the procedures enabled for this purpose, any incidents that may affect the security of personal data and that may compromise its confidentiality, integrity or availability, as well as non-compliance with the requirements established by the personal data protection regulations.
  • Comply with all legal requirements and obligations imposed by personal data protection regulations.

Information Security Policy

CIDAUT FOUNDATION (hereinafter, CIDAUT) is an entity dedicated to research and development in Transportation and Energy, with the objective of enhancing competitiveness and industrial development in companies in the transportation, energy and industry sectors in general. .

Aware of the importance that information security has for the development of its business, it has decided to implement a management system and subscribes to this policy.

CIDAUT establishes, defines and reviews objectives within its Information Security Management System (ISMS) aimed at improving its security, understanding it as the preservation of the confidentiality, availability and integrity of its information, as well as the systems that support it. support, increasing the confidence of our customers and other interested parties; along with compliance with all applicable legal, regulatory and contractual requirements.

The design, implementation and maintenance of the ISMS will be supported by the results of a continuous risk analysis and management process from which the actions to be carried out in terms of security within the scope of its system are derived, which is:

"Information systems that support the processes linked to the implementation of research, development and technological innovation projects, technological services and tests in the areas of: product design, energy and environment, materials, transformation processes, safety in vehicles, road safety, mobility, acoustics and vibrations and information technologies and industry 4.0 that are of interest to the industry in general and especially to the transport and energy sectors."

The CIDAUT Management will establish the risk evaluation criteria so that all scenarios that imply an unacceptable level of risk are treated appropriately.

As part of the ISMS, Management will develop, implement and keep updated a Business Continuity Plan according to the needs of the company and dimensioned to the risks that affect it.

The CIDAUT Management is committed to the implementation, maintenance and improvement of the ISMS, providing it with those means and resources that are necessary and urging all staff to assume this commitment. To this end, CIDAUT will implement the measures required for the training and awareness of personnel with information security. In turn, when workers fail to comply with safety policies, Management reserves the right to apply disciplinary measures in accordance with the application agreement and within the applicable legal framework, and according to the impact this has on the organization.

Everything defined in this policy will be specified and developed in regulations and procedures of the ISMS, which will be integrated to the extent possible with other management systems of the organization, sharing those resources in favor of optimization and seeking continuous improvement of the efficiency and effectiveness of process management.

Every user will have the obligation to report security incidents using the guidelines established by CIDAUT.

This policy will apply to all personnel and resources that are within the scope of the ISMS, it is brought to their attention and is communicated to all interested parties.