Home / Talent / Projects and doctorates / page 3
Final Year Project 2003

Optimization of acoustic design for bass-reflex speaker boxes using numerical methods

Writers: Cordero Izquierdo, Roberto
Date: 1 / 12 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Maria Jose Hernandez Echegaray
Final Year Project 2003

Study and development of the methodology for the vibratory characterization of materials and mechanical joints

Writers: Gonzalez Ganso, Jose Andres
Date: 1 / 02 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Beatriz Cesteros Morante
Final Year Project 2003

Design of the automated positioning platform for the drive system for light alloys in liquid state

Writers: Bombín Ortega, Pablo José
Date: 1 / 07 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Jose Antonio Maroto Soto
Final Year Project 2003

Mechanical behavior of polypropylene materials under monotonic tensile loading conditions

Writers: Glatz, Dagmar
Date: 26 / 12 / 2003
School: Institute of Materials Science and Testing of Plastics (UNIVERSITY OF LEOBEN)
Department: Polymer Competence Center Leoben
Managers: Esteban Cañibano Alvarez, Zoltán Major, Reinhold W. Lang
Final Year Project 2003

Assessing the impact of truck weight and size on rhode island traffic operations

Writers: Pérez Ríos, Ernesto
Date: 1 / 07 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Jose Maria Pastor Barajas
Managers: Manbir Sodhi
Final Year Project 2003

Design and development methodology for the automotive headliner component through experimentation.

Writers: Lopez Vicente, Jose Antonio
Date: 1 / 06 / 2003
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Managers: Roberto Martin Macias
Final Year Project 2003

Study and development of the methodology for the identification of modal parameters in hinges and their application using the finite element method

Writers: Sanchez Bragado, Angelica
Date: 1 / 12 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Ismael De La Cruz Ceinos
Thesis 2003

Obtaining and characterization of cross-linked metallocene polyolefin elastomers for industrial applications

Writers: Nicolas Merelas, Javier
Date: 7 / 02 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla, Jose Maria Pastor Barajas
Final Year Project 2003

Development of control software and simulation of a robotic paint sprayer

Writers: Izquierdo Belenguer, Luis Angel
Date: 1 / 06 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Jose Maria Pastor Barajas
Managers: Thomas Impelluso
Final Year Project 2003

Simulation of a race kart suspension

Writers: Gallego Castro, Carlos
Date: 1 / 06 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Jose Maria Pastor Barajas
Managers: Thomas Impelluso
Final Year Project 2003

Determination of the laminar combustion rate for lean gases by using a constant volume combustion pump

Writers: Trujillo Sanz, Enrique Juan
Date: 5 / 12 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Tutors: Alfonso Horrillo Guemes
Managers: Alvaro Lafuente Lafuente
Final Year Project 2003

One-dimensional and three-dimensional modeling of the human cochlea

Writers: Cebrián Calderón, Julián Alberto
Date: 1 / 06 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Felipe Montoya Moreno
Managers: Antonio Hidalgo Otamendi
Final Year Project 2003

Development of a refrigerated trailer in new materials

Writers: Maroto Santiago, Juan Carlos
Date: 1 / 06 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla
Final Year Project 2003

Development of an experimental procedure for the characterization of materials as a function of frequency

Writers: Bragado Perez, Beatriz
Date: 1 / 02 / 2003
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Tutors: José Mª García Terán
Managers: Miguel Angel Morcillo Lopez
Final Year Project 2003

Development of the analysis program of a vibroacoustic characterization equipment using labview

Writers: Sanz Marin, Ruben
Date: 1 / 06 / 2003
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Electronic Technology
Tutors: José Mª Ruiz González
Managers: Esteban Cañibano Alvarez
Final Year Project 2003

Analysis of the influence of the soil on road containment systems through finite element modeling

Writers: Hernandez Parriego, Isaias
Date: 1 / 06 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Roberto Barbero Valdivieso
Final Year Project 2003

Study of the creation process of spin off companies

Writers: Alonso Lorenzo, Pablo
Date: 1 / 01 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Maria Teresa Fernandez Peña
Final Year Project 2003

Development of a composite brake disc using the finite element method

Writers: Domingo Nieto, Mª Esther
Date: 1 / 05 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Esteban Cañibano Alvarez
Final Year Project 2003

Characterization of polymeric materials with optical techniques and their implementation using FEM

Writers: Garcia Alonso, Celia
Date: 1 / 05 / 2003
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Jose Maria Pastor Barajas
Managers: Esteban Cañibano Alvarez
Final Year Project 2002

Obtaining hydrogen through natural gas reforming

Writers: Albillos Alonso, Ester
Date: 1 / 03 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Chemical engineering
Tutors: Gregorio Antolín Giraldo
Managers: Yolanda Briceño Bueno
Final Year Project 2002

Biodegradable lubricating oils from sunflower and used vegetable oils

Writers: Gentleman, JA
Date: 1 / 07 / 2002
School: School of Chemical Engineering (UNIVERSITY OF VALLADOLID)
Department: Chemical engineering
Tutors: Gregorio Antolín Giraldo
Managers: Yolanda Briceño Bueno
Final Year Project 2002

State of the art in commercial aircraft interiors. Practical application to a passenger cabin

Writers: Vaca Cerezo, Juan Rodríguez Villegas, Marco
Date: 1 / 04 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Manufacturing Process Engineering
Tutors: Moisés Blanco Caballero, Alberto Zamarrón Pinilla, Araceli Martín Panero
Final Year Project 2002

Redesign of modular seat for minivan vehicle

Writers: Zamarrón Pinilla, Alberto
Date: 1 / 04 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Graphic Expression in Engineering
Tutors: Moisés Blanco Caballero
Managers: Pedro Garayo Olarra
Final Year Project 2002

Development and implementation of a plasticization model for light alloys in semi-solid injection processes

Writers: Martin Carbajosa, Jorge
Date: 2 / 12 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Jose Antonio Maroto Soto
Final Year Project 2002

Design and optimization of an aluminum stub axle using finite elements

Writers: Alonso Martín, Jesús María
Date: 1 / 06 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla
Final Year Project 2002

Redesign of components for a modular roof

Writers: Gutierrez Alonso, Enrique Alonso Raposo, Maria
Date: 1 / 01 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Managers: Pedro Garayo Olarra
Final Year Project 2002

Design and automation of a catapult system for low speed tests of the bumper system

Writers: Grande Martín, Ana María
Date: 1 / 02 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: David Garcia Ruiz
Final Year Project 2002

Study of the influence of flame convection on cyclic dispersion in MEP

Writers: González Redondo, Agustín
Date: 1 / 10 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Energy Engineering and Fluid Mechanics
Tutors: Alfonso Horrillo Guemes
Managers: Gerardo Cabaco Ordoñez
Final Year Project 2002

Development of a work method for the investigation and reconstruction of traffic accidents

Writers: Molinero Martinez, Aquilino
Date: 1 / 06 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Esteban Perez Blanco
Final Year Project 2002

Thermomechanical analysis applied to automotive safety components through the MEF

Writers: Sanchez Estevez, Luis Miguel
Date: 1 / 01 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Esteban Cañibano Alvarez
Final Year Project 2002

Dynamic study of the movement of the middle ear ossicles

Writers: Lopez Valdes, Francisco Jose
Date: 1 / 07 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Felipe Montoya Moreno
Final Year Project 2002

Dynamic simulation of a seat as part of the restraint system in a frontal impact

Writers: Lopez Muñoz, Luis Javier
Date: 1 / 06 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Tutors: José Mª García Terán
Managers: Jose Luis Moreno De Castro
Final Year Project 2002

Study of the efficiency of floating floor configurations against impact noise and vibrations

Writers: Martin Lopez, Beatriz
Date: 31 / 01 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Telecommunications Technical Engineering (Sound and Image)
Tutors: Jaime Ramis Soriano, Jesús Alba Fernández
Final Year Project 2002

Application of simulation using finite elements to the development of new high containment systems for roads: metal parapets

Writers: García Peña, Mr. Juan M.
Date: 1 / 07 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Roberto Barbero Valdivieso
Final Year Project 2002

Theoretical and applied methodology of dynamic simulation using the explicit finite element method using the radio code

Writers: Olmedo De Pablo, Carlos
Date: 1 / 05 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: Roberto Martin Macias
Final Year Project 2002

Dynamic study and simulation of the front suspension of a motor vehicle using multibody theory

Writers: Garcia Fernandez, Maria Teresa
Date: 1 / 05 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Tutors: José Mª García Terán
Managers: Esteban Cañibano Alvarez
Final Year Project 2002

Proposal for a ceiling console for rear seat entertainment of the BMW X5 vehicle

Writers: Diaz Rodriguez, Isabel Rodriguez Garcia, Abel Pedro
Date: 1 / 01 / 2002
School: School of Technical Engineering in Industrial Design (UNIVERSITY OF VALLADOLID)
Department: Graphic Expression in Engineering
Tutors: Roberto Pradanos Del Pico
Managers: Pedro Garayo Olarra
Final Year Project 2002

Study using the finite element method of the skin effect in electrical conductors

Writers: Perez Cano, Cesar
Date: 1 / 01 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Electric engineering
Managers: Daniel Moriñigo Sotelo
Final Year Project 2002

Characterization of rolling noise using acoustic quality techniques

Writers: Hernandez Echegaray, Maria Jose
Date: 1 / 07 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Esteban Perez Blanco
Managers: Miguel Angel Morcillo Lopez
Final Year Project 2002

Study and analysis of active-passive safety systems integrated into the automobile. Application to the dynamic simulation of a side impact

Writers: Pascual Fernandez, Alberto
Date: 1 / 04 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: Alberto Negro Marne
Final Year Project 2002

Study and evaluation of an impact attenuator for roads in accordance with the UNE EN 1317 standard

Writers: Mostaza Fernandez, Juan Jose
Date: 1 / 06 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: Roberto Barbero Valdivieso
Final Year Project 2002

Study of the behavior of the front end against low speed impacts and pedestrian protection

Writers: Vicente Lopez, Ana Maria
Date: 1 / 09 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: Monica Diez Marin
Final Year Project 2002

Vehicle control for impact tests on safety barriers

Writers: Burgoa Román, Francisco Javier
Date: 1 / 03 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Alberto Mansilla Gallo
Final Year Project 2002

Thermofluid dynamics of filling and solidification of countergravitational molding of light alloys in green sand mold. computer simulation

Writers: Juarez Martin, Julio Cesar
Date: 1 / 04 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Jose Antonio Maroto Soto
Final Year Project 2002

Development and tuning of the flextest GT equipment. Experimental analysis of a damping ball joint subjected to fatigue testing

Writers: Bernal Rodriguez, Juan Jose
Date: 1 / 03 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: David Garcia Ruiz
Final Year Project 2002

Use of sound intensity measurement for the detection and analysis of sound passage

Writers: Galarza Sanz, Jorge
Date: 1 / 02 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Marta Herráez Sánchez
Final Year Project 2002

Numerical prediction of the thermomechanical behavior of the brake disc

Writers: From Amo Nieto, Omar
Date: 1 / 05 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla
Final Year Project 2002

Study and analysis of the behavior of vehicle road containment systems and the safety of their occupants against high-speed impacts in full-scale tests

Writers: Plato San Francisco, Rubén
Date: 1 / 11 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: Miguel Angel Calle Ligero
Final Year Project 2002

Virtual reality skilift: creation of a threedimensional environment

Writers: Blanco Redondo, Gustavo
Date: 1 / 07 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Thomas Impelluso
Managers: Jose Maria Pastor Barajas
Final Year Project 2002

Study of head impact protection for vehicle occupants development of the experimental testing system according to FMVSS 201 U

Writers: Rodriguez Zurita, Jose Abel
Date: 1 / 09 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: Alberto Regidor Gonzalez
Final Year Project 2002

Design of specific sensors for use in instrumented tests

Writers: Escayo Noriega, Angel Luis
Date: 1 / 09 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: David Garcia Ruiz
Final Year Project 2002

Development of an experimental procedure for the acoustic characterization of the passenger compartment of a car

Writers: Martin Sanchez, Juan Sabas
Date: 1 / 07 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Miguel Angel Morcillo Lopez
Final Year Project 2002

Development of the procedure for the characterization of metallic fatigue materials

Writers: Cerezo Alarcón, Alberto
Date: 1 / 06 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Esteban Cañibano Alvarez
Final Year Project 2002

Development of a numerical procedure applied to the acoustic characterization of the interior of a car

Writers: García Torres, Carlos
Date: 1 / 09 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Antonio Hidalgo Otamendi
Final Year Project 2002

Model of the behavior of a loudspeaker in an acoustic box

Writers: Blanco Fernandez, Luis Angel
Date: 1 / 09 / 2002
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Antonio Hidalgo Otamendi
Managers: Antonio Hidalgo Otamendi
Final Year Project 2002

Simulation of a numerical control center with 5 degrees of freedom

Writers: Estebanez Elguezabal, Cayetano
Date: 1 / 02 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Urbano Dominguez Garrido
Managers: Esteban Cañibano Alvarez
Final Year Project 2002

Study and analysis through simulation of the dynamics of a vehicle and its occupants in a rollover phenomenon

Writers: Vilorio Gilsanz, Javier
Date: 1 / 09 / 2002
School: Higher Polytechnic School (UNIVERSITY OF VALLADOLID)
Department: Strength of Materials, Structures and Civil Engineering
Tutors: José Mª García Terán
Managers: Carlos Alberto Bernardo Gonzalez
Final Year Project 2001

Rheological characterization of light alloys in a semi-solid state and its application in the simulation of pressure injection processes

Writers: Bazal Perez, Roberto
Date: 3 / 09 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Jose Antonio Maroto Soto
Final Year Project 2001

Sizing of a facility for the production of biodiesel from used vegetable oil

Writers: Vegas M., Laura
Date: 2 / 07 / 2001
School: School of Chemical Engineering (UNIVERSITY OF VALLADOLID)
Department: Chemical engineering
Tutors: Gregorio Antolín Giraldo
Managers: Yolanda Briceño Bueno
Final Year Project 2001

Design and development of instrumented tests to study the behavior of the bumper system in low-speed collisions

Writers: De Prado Rodriguez, Jose Alberto
Date: 2 / 07 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Alberto Mansilla Gallo
Managers: David Garcia Ruiz
Final Year Project 2001

Lightened kinematic functions applied to vehicle suspension and steering systems

Writers: Garcia Terradillo, Rodrigo
Date: 1 / 05 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Esteban Cañibano Alvarez
Final Year Project 2001

New protection concepts in automotive safety elements

Writers: Garcia Casado, Monica
Date: 1 / 04 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla
Final Year Project 2001

Compatibilization of PP/PA6 mixtures using PP-F-DEM as a compatibilizing agent

Writers: Freitas Intili, María Isabel
Date: 1 / 02 / 2001
School: Simón Bolívar University School (UNIVERSITY OF VALLADOLID)
Department: Polymers
Tutors: Carmen Rosales
Managers: Jose Maria Pastor Barajas
Final Year Project 2001

Fatigue simulation using finite elements of automotive components

Writers: Lorenzo Perez, Cesar
Date: 1 / 05 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Managers: Juan Carlos Merino Senovilla
Final Year Project 2001

Study and analysis of functional dimension chains for technical specification in product design, tuning and practical application on a mechanism

Writers: Gomez Manrique, Teodoro
Date: 1 / 12 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Physics of Condensed Matter, Crystallography and Mineralography
Tutors: Juan Carlos Merino Senovilla
Managers: Pedro Garayo Olarra
Final Year Project 2001

Experimental measurement of defects causing noise and low-frequency vibrations in automotive braking systems

Writers: Galán De La Fuente, Juan Ignacio
Date: 1 / 07 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Esteban Cañibano Alvarez, Manuel Ignacio Gonzalez Hernandez
Final Year Project 2001

Study of acoustic comfort parameters in the automobile using acoustic quality techniques

Writers: Cabrerizo Juarez, Mariano
Date: 1 / 05 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Managers: Esteban Perez Blanco
Final Year Project 2001

Obtaining and studying polypropylene nanocomposites using ceramic nanoparticles

Writers: Cajiao, Cristina
Date: 1 / 02 / 2001
School: Simón Bolívar University School (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Carmen Rosales
Managers: Jose Maria Pastor Barajas
Final Year Project 2001

Comparative study by the pressure and intensity method of airborne noise insulation of a material

Writers: Fernandez Rodriguez, Jorge
Date: 1 / 12 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Marta Herráez Sánchez
Managers: Miguel Angel Morcillo Lopez
Final Year Project 2001

Development of experimental procedures for the application of dynamic characterization techniques in non-linear automotive elements

Writers: Perez Romera, Francisco
Date: 1 / 07 / 2001
School: Higher Technical School of Industrial Engineers (UNIVERSITY OF VALLADOLID)
Department: Mechanical Engineering and Materials Engineering
Tutors: Esteban Perez Blanco
Managers: Miguel Angel Morcillo Lopez

Supplier policy

Guidelines for the evaluation, selection, performance monitoring and re-evaluation of external suppliers of the CIDAUT Foundation

1. Object

This document is established to inform CIDAUT Foundation suppliers of the general guidelines followed for the evaluation, selection, performance monitoring and re-evaluation of external suppliers.

2 Area of ​​application

In accordance with the requirements of ISO 9001:2015, this document applies to external suppliers of the CIDAUT Foundation that supply products and services that may adversely affect the ability to deliver the results of the projects, technological services and tests that develops the CIDAUT Foundation. Below is a non-exhaustive list of processes, products and services to which these guidelines would apply:

Services and/or processes of:

  • tests, proficiency tests, calibrations or sampling
  • design
  • manufacturing of parts, molds, tools, electrical and/or electronic components, elements or assemblies necessary for the manufacture of prototypes, machines or any element that will be delivered to the client or on which tests or tests will be carried out that will constitute the results to deliver to the customer
  • analysis, evaluation, audit or technical advice whose conclusions and/or results will be integrated into the results to be delivered to the client
  • development of specific facilities for the development of projects, technological services or trials
  • key support services that can affect the outcome of projects, technological services or tests: maintenance of facilities and equipment, software administration and maintenance, etc.

Products

  • standards and auxiliary equipment for calibration/verification of measurement and monitoring equipment
  • reference elements and materials
  • measurement and monitoring equipment
  • raw materials that must meet specific requirements of the Project, Technological Service or Test
  • materials, reagents, additives, etc. necessary for the development of a new material that will be the result of the technological project or service or on which the tests or tests that will constitute the outputs/results of the technological project or service will be carried out.
  • consumables that must meet specific requirements for the correct operation of key equipment / installation for the development of the project, technological service or test
  • key equipment and facilities for the development of the project, technological service or test
  • software that can determine the results of the project, technological service or test (CAD/CAE/CAM)

3. Development
3.1. Evaluation and selection of suppliers
The Foundation Purchasing Manager establishes the criteria based on which the evaluation and selection is carried out in order to guarantee that the selected supplier supplies the products and services in accordance with the necessary requirements. The selection criteria are a combination of the following depending on the type of product/service:

  • Ability to meet legal requirements and customer requirements
  • Adaptation to the specific need: For complex products/services, the proposal of the supplier that best meets the need
  • Technical Capacity: The supplier has the appropriate material and human resources
  • ENAC accreditations: The supplier is accredited by ENAC for the development of calibrations, tests, etc.
  • Certifications: The supplier has a current ISO 9001 certification and within its scope are the products and/or services that are the object of the need.
  • Provider recommended or established by the Client
  • Previous experience: Provider in other departments or projects
  • Market recognition
  • References from clients, competitors, etc.
  • Risk and guarantees: Level of risk assumed by the supplier and/or guarantees offered
  • Financial Capacity: For large purchases
  • Supply Capacity
  • Flexibility towards changes
  • Accessibility
  • Ability to meet deadlines
  • Price
  • Payment method
In addition to the established criteria, whenever possible, for purchases exceeding the amount of 3.000? The selection of the supplier will be carried out by requesting offers from at least 3 suppliers.

3.2. Monitoring performance and reevaluation of suppliers.
To ensure that controlled external suppliers continue to supply in accordance with established requirements, suppliers are subject to periodic monitoring and control. Depending on the type of provider, it is established:

Supplier type Tracking Re-evaluation
Regular: regular suppliers X X
About project: specific suppliers for a given project X Does not apply
Occasional: single purchase suppliers Does not apply Does not apply

Tracking
Monitoring of external suppliers is carried out continuously:

  • Checking the maintenance of the ISO 9001 certification or ENAC accreditation that served as the basis for the approval. In case of loss, approval could be withdrawn.
  • Checking compliance with commercial agreements
  • Review of the quality of purchases made.
    • Anomalies attributable to the supplier are tracked. When an incident gives rise to a customer claim or significantly affects the outputs or results of the project, technological service or test, a Non-conformity is opened. When the supplier's response is not adequate or when the severity of the anomaly causes the CIDAUT Foundation to lose confidence in the supplier, the approval is withdrawn.
Continuous monitoring also takes into account response times and price developments. When necessary, the Purchasing Manager may define other monitoring activities. Some possible follow-ups are:
  • Audits
  • Service quality reviews
  • Visits to the supplier
  • Product inspections
  • Monitoring of indicators
  • Meetings with service users

Re-evaluation
Regular suppliers are periodically re-evaluated. For this, it is reviewed:

  • the criteria by which they were initially approved
  • the maintenance of ISO 9001 certification or ENAC accreditation if they were determining elements in the approval of the supplier
  • compliance with trade agreements
  • the history of incidents and follow-ups carried out
  • the level of service of the provider taking into account in particular unanswered requests, response times and accessibility
  • price variations and its comparison with other competitors

Guarantee of impartiality

Impartiality and independence are basic principles of the CIDAUT Foundation's activity. CIDAUT Foundation acts impartially and independently of all types of pressures, whether commercial or otherwise, in its activities and services provided to clients, institutions and organizations.

CIDAUT Foundation continuously evaluates each possible conflict/risk that may affect the independence and impartiality of its activities, carrying out the pertinent consultations and inquiries to ensure that it does not incur any incompatibility and loss of independence in the aforementioned terms. Limiting activity and/or implementing relevant actions in case of doubt or conflict.

Personal Data Protection Policy

The personal data to be protected includes all those that are processed by us (whether data of clients, potential clients, suppliers, workers, contacts, external collaborators, etc.).


Therefore, both FUNDACION CIDAUT, and all its staff, whether internal or external, who are involved in some way in the processing of personal data, must:

  • Maintain secrecy and confidentiality of the information processed.
  • Protect the personal data you are processing and safeguard it so that unauthorized personnel do not have access to it.
  • Comply with data protection principles (legality, loyalty and transparency, limitation of purpose, data minimization, accuracy, limitation of retention period, integrity and confidentiality and proactive responsibility).
  • Guarantee that interested parties can exercise their rights (information, access, rectification, deletion, limitation of processing, data portability, opposition and automated individual decisions).
  • Comply with, and where appropriate, enforce, the controls and security measures that FUNDACION CIDAUT has implemented to protect the security of personal data, preventing the confidentiality, integrity or availability of said data from being compromised.
  • Immediately communicate, according to the procedures enabled for this purpose, any incidents that may affect the security of personal data and that may compromise its confidentiality, integrity or availability, as well as non-compliance with the requirements established by the personal data protection regulations.
  • Comply with all legal requirements and obligations imposed by personal data protection regulations.

Information Security Policy

CIDAUT FOUNDATION (hereinafter, CIDAUT) is an entity dedicated to research and development in Transportation and Energy, with the objective of enhancing competitiveness and industrial development in companies in the transportation, energy and industry sectors in general. .

Aware of the importance that information security has for the development of its business, it has decided to implement a management system and subscribes to this policy.

CIDAUT establishes, defines and reviews objectives within its Information Security Management System (ISMS) aimed at improving its security, understanding it as the preservation of the confidentiality, availability and integrity of its information, as well as the systems that support it. support, increasing the confidence of our customers and other interested parties; along with compliance with all applicable legal, regulatory and contractual requirements.

The design, implementation and maintenance of the ISMS will be supported by the results of a continuous risk analysis and management process from which the actions to be carried out in terms of security within the scope of its system are derived, which is:

"Information systems that support the processes linked to the implementation of research, development and technological innovation projects, technological services and tests in the areas of: product design, energy and environment, materials, transformation processes, safety in vehicles, road safety, mobility, acoustics and vibrations and information technologies and industry 4.0 that are of interest to the industry in general and especially to the transport and energy sectors."

The CIDAUT Management will establish the risk evaluation criteria so that all scenarios that imply an unacceptable level of risk are treated appropriately.

As part of the ISMS, Management will develop, implement and keep updated a Business Continuity Plan according to the needs of the company and dimensioned to the risks that affect it.

The CIDAUT Management is committed to the implementation, maintenance and improvement of the ISMS, providing it with those means and resources that are necessary and urging all staff to assume this commitment. To this end, CIDAUT will implement the measures required for the training and awareness of personnel with information security. In turn, when workers fail to comply with safety policies, Management reserves the right to apply disciplinary measures in accordance with the application agreement and within the applicable legal framework, and according to the impact this has on the organization.

Everything defined in this policy will be specified and developed in regulations and procedures of the ISMS, which will be integrated to the extent possible with other management systems of the organization, sharing those resources in favor of optimization and seeking continuous improvement of the efficiency and effectiveness of process management.

Every user will have the obligation to report security incidents using the guidelines established by CIDAUT.

This policy will apply to all personnel and resources that are within the scope of the ISMS, it is brought to their attention and is communicated to all interested parties.

Privacy summary

This website uses cookies so that we can offer you the best possible user experience. The information of the cookies is stored in your browser and performs functions such as recognizing you when you return to our website or helping our team understand which sections of the website you find most interesting and useful.